--- name: UniFi Firewall slug: unifi-firewall category: DevOps description: Helps manage zone-based firewall rules on UniFi networks, including segmentation (IoT, cameras), policy creation, and lockout safety. Use when creating, auditing, or troubleshooting firewall policies on modern UniFi controllers. github: "https://github.com/t3chnaztea/unifi-skills/tree/main/skills/unifi-firewall" language: Python stars: 33 forks: 1 install: "npx degit https://github.com/t3chnaztea/unifi-skills/tree/main/skills/unifi-firewall ~/.claude/skills/unifi-firewall" installs_to: ~/.claude/skills/unifi-firewall source_path: skills/unifi-firewall/SKILL.md collection_size: 6 category_size: 798 collection_url: "https://dirskills.com/collections/t3chnaztea/unifi-skills" added: 2026-08-11T07:21:50.203Z last_synced: 2026-08-11T07:21:50.203Z canonical_url: "https://dirskills.com/skills/unifi-firewall" --- # UniFi Firewall Helps manage zone-based firewall rules on UniFi networks, including segmentation (IoT, cameras), policy creation, and lockout safety. Use when creating, auditing, or troubleshooting firewall policies on modern UniFi controllers. **Install:** ```bash npx degit https://github.com/t3chnaztea/unifi-skills/tree/main/skills/unifi-firewall ~/.claude/skills/unifi-firewall ``` ## README # UniFi Firewall Modern UniFi Network replaced the old LAN-IN / LAN-LOCAL / WAN-IN rule groups with a **zone-based firewall**. Every network belongs to a zone, and policies govern traffic between zone pairs rather than between interfaces. This is a better model and a worse migration, because the old API endpoint still exists and still answers. ## Why your firewall rules look empty ```bash udm raw GET /proxy/network/api/s/default/rest/firewallrule # [] ``` An empty array. The endpoint is alive, authenticated, and lying by omission: on a zone-based controller your rules are not there. They are here: ```bash udm policies # GET /proxy/network/v2/api/site/default/firewall-policies udm zones # GET /proxy/network/v2/api/site/default/firewall/zone ``` An agent that reads `rest/firewallrule`, sees `[]`, and concludes the network is unfirewalled will confidently propose rebuilding rules that already exist. If a gateway reports zero firewall rules and it is clearly not wide open, you are on the wrong endpoint. **The zone endpoint is singular.** `/firewall/zone` works, `/firewall/zones` 404s. There is no reason for this; just remember it. ## The trap: new zones default to BLOCK against Internal The single most expensive thing to learn the hard way. **Creating a new custom zone auto-generates default policies, and the Internal↔zone pair defaults to BLOCK in both directions.** External and Gateway pairs default to allow, and custom→External allows, so the new zone reaches the internet fine. What it loses, instantly and completely, is the trusted LAN: DNS resolvers, the media server, the home-automation hub, the NAS. The failure mode is nasty because it is partial. Devices still have internet. They still associate, still pull DHCP, still look healthy in the controller. They just cannot resolve names against your internal resolver, so everything degrades ten seconds later in a way that reads like a DNS outage. **Stage the allow policies before you create the zone.** Have the payloads written and ready to POST, create the zone, then immediately POST the allows. Do not create a zone at the end of a session, and do not create one for a segment containing anything you or your household will notice going down. If you are already in the hole: the zone exists, its devices are cut off, and the fix is POSTing allow policies to `firewall-policies` for the Internal→zone and zone→Internal directions. ## A worked segmentation: IoT and cameras The common goal. Two custom zones, each with a deliberately small hole punched back into the trusted network. **IoT zone.** Cheap devices with vendor cloud dependencies. They need the internet, they need the gateway, and they need a very short list of internal services: - zone → External: allow (they phone home, that is what they do) - zone → Gateway: allow (DHCP, DNS to the gateway itself) - zone → Internal: **allow only specific destination+port pairs** - DNS, tcp/udp 53, to your internal resolvers - your media server's port, to that host only - your automation hub's UI port and MQTT broker port, to that host only - zone → Internal: block everything else, explicitly, as the last rule - Internal → zone: allow all (you want to reach them; they should not reach you) **Camera zone.** Cameras are the segment most worth isolating and the easiest, because a locally-recorded camera needs almost nothing: - zone → Gateway: allow - zone → External: **block**, with an explicit named policy. This is the whole point. A camera that cannot reach the internet cannot be recruited into a botnet, cannot phone a vendor cloud, and still records perfectly to a local NVR. - Internal → zone: allow all Order matters within a zone pair, same as any firewall. Put the narrow allows above the broad block. If you also run per-device rules (a smart TV blocked from ad domains, a bedtime schedule on a game console) note that rules written against the Internal zone do **not** follow a device when you move it to a custom zone. Mirror them into the new zone, or the schedule you set up last year quietly stops applying. ## Writing policies ```bash # List, and find the one you mean udm policies --json | python3 -c ' import json,sys for p in json.load(sys.stdin): print(p["_id"], p.get("action"), p.get("name"))' # Create udm policies create '{...}' # Update: GET the policy, modify, PUT the whole object back udm policies update '{...full object...}' udm policies delete ``` Build a payload by reading an existing policy of the same shape and editing it. The schema is undocumented and version-specific; a policy the controller wrote itself is the most reliable template you will find. **v2 PUTs may return HTTP 201 instead of 200. That is success.** Do not retry. **Verify from a fresh GET, never from the PUT response.** Re-read the policy list and confirm the rule is present, enabled, in the position you expect, and in the zone pair you expect. ## Lockout safety You are configuring the device your management traffic flows through. A firewall mistake here does not throw an error, it removes your ability to fix the error. - **Know your out-of-band path before the first write.** Physical console access, a directly-cabled port, the recovery procedure for your model. If your answer is "I'd just SSH in", check that SSH is even enabled: on many UniFi OS gateways port 22 is closed by default. - **Never apply a default-deny to the zone holding your workstation.** Obvious until the moment you are auditing zones and one of them is quietly the one you are sitting in. - **Write allow policies before restrictive ones**, not after. The window between "zone created" and "allows applied" is a live outage. - **One change, one verification.** Batching six policy writes and then testing means the failure is in one of six places, and you may not be able to reach the controller to find out which. - **Snapshot first.** `udm policies --json > policies-$(date +%F).json` costs nothing and is the difference between a rollback and an archaeology project. - Prefer **scheduled maintenance windows for segmentation work**, for the same reason you would on any other network: the recovery involves walking to the device.